We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Gato Audio DPA-2506 is a 6 channel flexible power amplifier, that offers unparalleled power and performance in the smallest and most beautiful package.
We offer bespoke top covers for your DPA-2506. Have it matched to your decor or super car. We can paint them in virtually any color. So contact us at hello@gato-audio.com and tell us what you have in mind.
The DPA-2506 offers no less than 6x250W in 8ohm load, doubling in 4ohm. Each pair of channels are bridgeable – enabling this fully configurable powerhouse to be used for either multichannel setups, active systems or for bi-amping speakers.
This amplifier is the obvious choice for the Gato Audio PRD-3S preamplifier/DAC, but is also very suitable as a workhorse for the integrated amplifiers DIA-250S and DIA-400S – offering even more channels and flexibility.
For multichannel systems it will serve as a slave for a surround processor perhaps in combination with a PRD-3S, DIA-250S or DIA-400S enabling their Home Theater setting.
The DPA-2506 amplifier offers three state of the art Class-D output stages each with dedicated and optimized switch mode power supplies. The multiple stage power amplifiers are built around proven technology from International Rectifier, optimized with precision high frequency oscillators and PWM modulators. Precision switching MOS-FET transistors, with super low on-resistance ensures the high frequency switching is done perfectly and with as little loss as possible. The output filters are made from quality PP capacitors and low DCR coils, converting the high power PWM signals back into detailed and smooth analogue music.
@8ohm
6 Channels: 6x 250W
3 Channels: 3x 900W
4 Channels: 2x 900W + 2x 250W
5 Channels: 1x 900W + 4x 250W
@4ohm
6 Channels: 6x 500W
3 Channels: 3x 1050W
4 Channels: 2x 1050W + 2x 500W
5 Channels: 1x 1050W + 4x 500W
As standard we offer top covers in high gloss black, white and real walnut veneer to match the finish of our loudspeakers. But what if you prefer to have your DPA-2506 match another brand of speakers or a piece of furniture or the color of your Lamborghini? Gato Audio offer to make bespoke top covers for you. We can paint them in virtually any color. So contact us at hello@gato-audio.com and tell us what you have in mind.
Output power @ 8 O | 6x250W / 3x900W / 2x900W +2x250W / 1x900W+4x250W |
---|---|
Output power @ 4 O | 6x500W / 3x1050W / 2x1050W +2x500W / 1x1050W +4x500W |
Frequency response | 20 Hz-20 kHz - 0.5 dB, and 2 Hz-70 kHz - 3 dB |
Total Harmonic Distortion | < 0,01% at rated power |
Signal to noise ratio | > 110 dB |
Input impedance | 20 kO RCA or 40 kO Balanced |
Voltage gain | 26 dB |
Recommended speaker load | SE 4 -16 O , BTL 8 -16 O |
Connectors |
|
Balanced analogue inputs | 3 pairs gold plated XLR Neutrik |
Unbalanced analogue inputs | 3 pairs of gold plated RCA Stereo |
Speaker output | 6 pairs of gold plated safety banana |
Trigger, 12 V | 1 pc mini jack |
Size and Weight |
|
Power Requirements | 115 VAC/230 VAC, 50 Hz/60 Hz, 2000W max |
Power consumption stdb/idle/max | < 1W/75W/2000W |
Dimensions (WxHxD) | 325 x 105 x 420 mm / 12.8 x 4.1 x 16.5" |
Weight | 13 kg / 28.7 lb |
DPA-2506 Manual |
---|
Enjoy Gato Audio's fast and FREE worldwide shipping - all taxes and duties paid! All shipments can be tracked.
Buy it and try it! Test our gear at home for 30 days - return it for a full refund if you don't like it!
Gato Audio products are awarded for their sound, build quality and design by the industry's toughest critics!